wipersIf there is any component of your car that is largely neglected, they have to be the windshield wipers. They are installed in front of the windshield and are responsible for keeping it clean. With the windshield washer, the rubber blades wipe away any dirt or debris that may be present on the glass. This way, not only does your windshield stay clean, but you can also see the road clearly. This helps ensuring increased road safety.

Changing the wipers from time to time is very important. Let’s talk about how and when you can replace your windshield wipers.

When to Change Your Windshield Wipers?

There are two different things that should be considered. The first is changing the entire windshield wiper, whereas the second involves simply changing the blades of your wiper. Depending on the condition, you can make a choice between the two situations. The right time to change your wipers also depends on this research.

If your windshield wipers are working fine but have worn out over time, or cause smudges and streaks, then it is time to replace them immediately. If you notice any corrosion on the metal arm of the metal frame, make sure to change them completely. This is better than just changing the blades.

If they are working fine but the season is changing from summer to winter. This will mean that the wipers won’t be able to withstand the harsh weather conditions. The best way to go about this is to replace your current ones with special wipers that are designed for winter. These wipers contain special rubber that doesn’t accumulate snow or ice.

On the other hand, when the weather changes from winter to summer, you can replace the windshield wipers once again.

How to Change Your Windshield Wipers?

Windshield wipers have three parts: the lower metal arm, the metal blade connected to it, and the rubber blade that is attached to the metal blade. There are two different types of connectors that hold the blade together with the arm. This includes the hook connectors and pin connectors.

Hook Connector

Most of the windshield wipers have a hook-shaped connector that makes it easy to remove and install the blade. All you need to do is to pull the tab and turn the blade until it comes apart from the hook. In the same way, you can swing the new wiper blade in place and press the tab until you hear a snap.

Pin Connector

Some windshield wipers also make use of a pin connector to hold the blade and arm together. To remove the blade in these, you have to pull on the tab and remove it from the pin on the arm. Next, you have to attach the new wiper blade to the pin and push the tab to lock it in place.

This concludes our guide on how and when you should change a windshield wiper. By following the above tips and methods, you will be able to ensure that they keep working properly and also keep your windshield clean always.